Returning a Hung-up System to Normal (AZBox)

Returning a Hung-up System to Normal (AZBox)



Returning a Hung-up System to Normal (AZBox)
Have the television connected via the HDMI or SCART cable.

Power UP the Receiver with the USB stick (loaded with the latest Patch) Inserted.

From the Upgrade menu, choose: 4. Format application area. - This action removes the corrupt software.

When the message "Formatting: done" is on the screen, Press the EXIT key to return to menu.

Choose 1.USB - The receiver will then search for a valid patch.

When found, it will give details of your version on the receiver, and the patch version.

Also, it asks if you want to update, - press OK.

The patch file is then extracted, with details of the progress shown on the TV screen.

There is also a warning: DO NOT POWER OFF.

After the patch is loaded, the receiver will reboot itself, returning to the Upgrade menu.

Choose 5. Boot without update.

When the Receiver is rebooted, remove the USB stick.

You can now Setup the receiver from scratch.

After Re-Establishing The Internet Connection within the Setup menu, also checked the Network Service screen, that the FTP Server and the Telnet Server (if it applies to you) are both enabled

__________________