Coolsat 6100 Setup Guide

Coolsat 6100 Setup Guide

This is what you see when you first turn it ON or When you do Factory Reset, select the Language and Local time



1 - How To flash Your Receiver with USB Memory Stick:

Download, Unzip the latest FIRMWARE from NORW and save it on your USB Memory. Insert it into the receiver, hit Red Button on the Remote Control, wait until it finishes and reboots itself to Standby Mode or four Dashes (----). Now, go ahead and turn it on again.



2 - Dish Setting / Receiver Setup:

Do Factory Reset right after you FLASHED your receiver, even though it has nothing in your receiver. Hit Menu===> Installation===> System Recovery===> System Restore To Factory Default===> hit OK.

Select the Language, local time, hit Auto Detect. It’ll scan, detect and save everything for you.



• Renumbering Local Channels: Menu Option Renumbering Local Ch. Pick your State & the Cit
• How to Populate EPG: Go to channel 239 and hit the EPG button on your remote. You should see the Echo EPG item with the Blue circle next to it. Go ahead and hit the blue button on your remote and the Extended EPG popup should stay on the screen while the EPG is being populated. Warning, if it pops up and goes away immediately… then you screwed something up. If it stays and populates out to 9 days, Congratulations!