Coolsat EPG Guide Population Work Around

Coolsat EPG Guide Population Work Around

c/p

After struggling to figure out why my 6100 would not populate the EPG properly I stumbled across this after searching for an answer. Apparently there is a glitch with the EPG if you have both DN & BEV. I tested it on 3 receivers and it worked like a charm. It is C&P from another site.

If you have B3V and D!SH there is a bug that will make the blue button populate the B3V EPG instead of D!SH EPG if you want this to work you should follow this procedure :

Scanning B3V TP 12224 is where the breakdown occurs. Once this TP is scanned, it prevents DN EEPG data beyond 2 hours.

**Using a CS7000PVR, but I've been informed that this works for CS.6100/7000/7100/8000/8100 and the Visionsat line of products supported by NoRW.

1. Factory Default.
2. Enter your LNB/Switch settings.
3. Auto Scan 110 and 119 with Network Search 'ON'.
4. Delete TP 12224 from 91.0W B3V TP list.
5. Auto Scan 91.0W with Network Search 'OFF'.
6. Re-Add TP 12224 to 91.0W B3V TP list, and set Network Search 'ON' - DO NOT SCAN B3V TP 12224.
7. Ensure your setting for Auto CH/TP update is 'ON', eventually the channels from B3V TP 12224 will populate in your channel list without buggering the DN EEPG functionality.

** I have seen some instances where this process does not add the Yellow B3V EPG button to the OSD, Auto Scan of 82.0W corrects this issue without buggering DN EEPG functionality.