Setting up the ILink IR210 (Black Devil)

Setting up the ILink IR210 (Black Devil)
1. Connect to TV and Antenna
2. Connect dongle and network cable to STB.
3. Turn on STB and TV
4. STB will go to menu.
5. Now copy the current bin file (today 2.56) to usb stick using computer.
6. Place usb in STB.
7. Go over to the Utility then down to the USB.
8. Now scroll down to the file you want to load (today 2.56) hit ok and select the
Boot Loader Upgrade. Hit ok. Your file will load and reboot the STB.
9. After it goes back to the menu then Options and Control Panel. Press OK.
Select Local Area. (select the country,state, city exit.
10. Now scroll to time. Set time and exit.
11. Go to Network and select IP setup. On Network settings select Auto.
Then scroll down and select apply. That will populate the rest of the info needed.
12. Select Net Application then change to EPCS, scroll down to Key and make sure
The numbers ABDBADADA8ABA8AFAAAAAAAAAAA8AC D8 are inserted there and hit ok.
13. Check for software update. Scroll to SW download select Upgrade via Network.
14. If new software is available down load and let load and reboot.
15. Go to installations and select Satellite Search.
16. Select Satellites to set up. Now scan from there.
17. Very Simple to set up.

__________________




Testing: Sonysat DCR5500, pansat 9000hd, sv4k, sv360premier, pansat 2700a, coolsat 6000 and satopia ST1100-UT