KBox PROdigy - How-To Fix The Night Rider Lights

Fix The Night Rider Lights - KBox Pro

Night rider lights are caused by human error.

You would see 4 dashes like this ----

Make a note of your antenna settings because you will need to input them again.

Turn the box off using the switch on it.

Unplug from the wall outlet and unhook the cables. (do it this way so you do not blow your switch if you are using one).

Take the box to your pc.

Leave the box off.

Hook it up with a STRAIGHT Cable and fire up K1 Pro Loader v1.5

Download factory file


With Kboxloader v1.5 browse for the factory file

Press the Start

Turn the box on using the switch and let it run all the way through.
You should see 00.00 on the front LED.

Close loader and reopen it.

Shut the box off using the Back switch.

Browse for the latest bin which you will find in the kbox pro files section K1 Pro

Turn the box off using the switch on the back.

Unhook from the pc and connect to your tv using the reverse order that you unhooked it.

Turn the Kbox on using the switch on the back

Input your antenna settings.

Input proper time, time zone etc. Double check all your settings.

Scan for channels. save and exit out to Tv

Good Luck

__________________




Testing: Sonysat DCR5500, pansat 9000hd, sv4k, sv360premier, pansat 2700a, coolsat 6000 and satopia ST1100-UT