How to Upgrade Neosat IPro with 1.1(aka)3.34

How to Upgrade Neosat IPro with 1.1(aka)3.34
Neosat IPro with 1.1:
The only way to update with 1.1(aka 3.34) flashed to your stb with the IPRO model(one with built in Ethernet port) is by using the serial cable/loader application/PC.
there is 0% chance of updating the IPRO model any other way.

PRO AND DONGLE:
if you have the PRO model(one with no Ethernet port) and 1.1(334)and the dongle.you can connect and upgrade from the server because this updates through the units serial port.(this will not work with the more common IPRO.)
you can as well update with loader of course.


USB with Ethernet 1.1= 0%
neither unit can be updated via usb device,no matter what you try with version 1.1(3.34) flashed to your stb.if you plug in a usb stick,the stb will lock up,and not respond.you must update to a later file(or previous.just not 1.0/3.33-this had the same problem),at which point your Ipro/Pro will be restored,both usb and Ethernet ports.
the unit simply cannot see any file on your stick.it doesn't matter if its a factory file,or any other perfectly good file.consider the usb port dead until you can flash to a different file.

LOADER flashing info:
when using the loader,you can flash directly to any file you wish.you do not need to load any file in between,such as a factory file for example.you can,and then your usb port is restored.but since your using the loader application anyway.you can simply flash to the latest file directly.
factory default setting in the units menu system,not a factory flash,is recommended by v2neo after loading to the latest file.

__________________




Testing: Sonysat DCR5500, pansat 9000hd, sv4k, sv360premier, pansat 2700a, coolsat 6000 and satopia ST1100-UT