NfusionNova1v51_TronicsMod DN Fix Installation Guide

NfusionNova1v51_TronicsMod DN Fix Installation Guide
(Alternate Method)
Confirmed working by using the below instructions.


These instructions will help you load 151_0 for Nova

You will need the following applications for a new reciever out of the Box.


V131 (Nfusion loader),
U43 (Factory file)
NfusionNova1v51_TronicsMod.zip


Download and extract the following files to your desktop of your pc.


Attach one end of your null modem cable to your receiver and the other end to your computer. A null modem cable should of been supplied to you with the purchase of a new receiver. If you're computer doesn't have a serial port you will need a serial to Usb cable which most dealers carry in stock.

* Leave your reciever on

* On your computer select the V131 loader.

Make sure you're loader is set to the correct Com Port usually is port 1. Leave your loader set to Main.

Click----> Open file and select U43 (factory file)


*Press Start Down on your loader, You may hear a Beep from your PC and a screen should appear on your screen. The Screen will display a message instructing you to reboot your Stb (Receiver). Now press OK

Your computer screen will freeze and the screen will turn white the application will appear like it's frozen it's waiting for you to reboot your receiver by pressing the power button on the front of you're receiver twice. This will initiate the download process.

Keep and I on your status bar displayed on your PC the progress will match with the status displayed on your receiver. Don't touch or interrupt your PC or receiver just leave it alone. You will see the word's "Good" on the front of your receiver's display when the down load is completely finished do not touch your receiver until you see 4 (0000)'s displayed on the front of your receiver.

Now you completed updating your new receivers factory file. The next step is to load your (NfusionNova1v51_TronicsMod.zip ). Unzip file .. You will load it the same way that you loaded the factory file.

Click----> Open file and select 151_0


*Press Start Down on your loader, You may hear a Beep from your PC and a screen should appear on your screen. The Screen will display a message instructing you to reboot your Stb (Receiver). Now press OK

Your computer screen will freeze and the screen will turn white the application will appear like it's frozen it's waiting for you to reboot your receiver by pressing the power button on the front of you're receiver twice. This will initiate the download process.

Keep and I on your status bar displayed on your PC the progress will match with the status displayed on your receiver. Don't touch or interrupt your PC or receiver just leave it alone. You will see the word's "Good" on the front of your receiver's display when the down load is completely finished do not touch your receiver until you see 4 (0000)'s displayed on the front of your receiver.

Now your receiver's ready to go You updated to the latest Factory file & you loaded the NfusionNova1v51_TronicsMod.zip