9000HD b-05(b-06) LED Display Fix

9000HD b-05(b-06) LED Display Fix



This problem can be occurred by many reason using wrong bin file or defective memory stick, etc. You can fix by yourself as follows:

1. Click ‘9000HD’ in download section and save ‘9000HD.zip’ in your computer
2. Extract (unzip) 9000HD.zip and then copy and paste “API_FILE.bin” to the memory stick. (Note : Memory stick should not contain 9200HD API file)
Note: ‘API_FILE.bin’ is renamed file of ‘9000HD_090224_1014_api.bin’ for repair purpose.
3. Insert the memory stick to the receiver.
4. Press and hold volume up (right hand side) button gently (not too hard) and then turn reset power off and on.
5. “API” will be appeared on the front LED. After this you can release volume button and wait about 40 seconds until “END” appears after following the display “BURN”, “SUCC”.
6. Reset the unit to reboot and display “ON” or any channel number.
7. If “API” does not appear at item 4, try above procedure again.
8. Still can not fix, return to Panarex service.

Note: If you want to upgrade b-05 to b-06, open 9000HD download file and download
Mboot-06 boot file by memory stick

Attached Files

	API_ FILE.zip (1.02 MB, 0 views)
	b-06 fix.rar (6.8 KB, 2 views)