9200 Stuck On B-70 how too

9200 Stuck On B-70 how too



9200 Stuck On B-70




This problem can occur by using the wrong bin file or a defective memory stick. You have Formate your memory stick. If not you have to before you try thif fix.
Ok. Here we go:

1. Click ‘9200HD’ in the download section and save the ‘9200HD (PVR).zip’ in your computer
2. Extract (unzip) the 9200HD (PVR).zip and then copy and paste the “API_FILE.bin” to the memory stick. (Note : The memory stick should not contain 9000HD API file)
Note : The ‘API_FILE.bin’ is a renamed file of ‘9200HD_080725_1216_api_pvr.bin’
for repair purposes.
3. Insert the memory stick to the receiver.
4. Press and hold the volume up (right hand side) button gently (not too hard) and then turn the reset power button off and on.
5. The “API” will appear on the front LED. After this you can release the volume button and wait about 40 seconds until “END” appears after following the display “BURN”, “SUCC”.
6. Reset the unit to reboot and display “ON” or any channel number.
Note : If it the unit still displays “INIT” or “----“ and does not show anything
on the TV screen, reset the main power 2~3 times consecutively.
7. If the “API” does not appear at item 4, try the above procedure again